Program
The 5th Asian Thermal Spray Conference (ATSC2012) Program
Monday, November 26
Tuesday, November 27
Student Session
Poster Session
All Program (PDF file)
Nov.27
[Conference Room 101]
Chair: S. Kirihara
| Biomaterials |
Paper No. |
Title |
Speaker |
| 9:00-9:25 [Invited] |
I-4 |
In-Flight Temperature and Velocity of Powder Particles of Plasma Sprayed Hydroxyapatite |
K.A.Khor |
| 9:25-9:45 |
O-30 |
Addition of Hydroxyapatite Enhances Adherence of Escherichia coli Bacteria on Flame Sprayed Photocatalytic Titania-Based Coatings |
Y.Liu |
| 9:45-10:05 |
O-31 |
Investigation of Hydroxyapatite Spraying on AZ31 Magnesium Alloy for Biomaterial Application |
M. Hyland |
Chair: G. Sundararajan
| Cold Spray2 |
Paper No. |
Title |
Speaker |
| 10:05-10:30 [Invited] |
I-5 |
Material Science of Cold Spray Coatings on Multiple Scale Levels |
V.Luzin |
| 10:30-10:50 |
O-32 |
Use of Mini Tensile Test Specimen in Determining Mechanical Properties of Warm Spray Coatings of Titanium and Its Alloys |
R.M. Molak |
10:50-11:00 (Break)
Chair: H. Li
| Cold Spray2 (Contd.) |
Paper No. |
Title |
Speaker |
| 11:00-11:20 |
O-33 |
Relating High-Cycle Fatigue Properties and Fractographic Features of Plasma, Warm and Cold Sprayed Materials |
J.Cizek |
| 11:20-11:40 |
O-34 |
Significance of Particle Impact Conditions on Bonding, Microstructural Parameters and Mechanical Properties in Kinetic Sprayed Tantalum |
G.Bae |
| 11:40-12:00 |
O-35 |
Formation of Intermetallic Reinforced Aluminium Composites by Annealing Treatment of Cold Sprayed Precursor |
H.T.Wang |
12:00-13:00 (Lunch Break)
Chair: G.J. Yang
| Cold Spray3 |
Paper No. |
Title |
Speaker |
| 13:00-13:20 |
O-36 |
Potential of Kinetiks ® Series and Its Application Example |
K.Onizawa |
| 13:20-13:40 |
O-37 |
Microstructure and Properties of Titanium Nitride Films Fabricated Via Vacuum Kinetic Spray |
F.Cao |
| 13:40-14:00 |
O-38 |
The Influence of Heat Treatment on the Microstructure and Mechanical Properties of Cold Sprayed Coatings |
S.Bo |
| 14:00-14:20 |
O-39 |
Effect of Substrate Elastic Modulus on Microstructure and Bonding of Al2O3 Coatings Deposited by Vacuum Cold Spray |
G.J. Yang |
| 14:20-14:40 |
O-40 |
Bonding of Cold Sprayed Aluminum on Glass - A Study with Transmission Electron Microscopy |
M.Song |
| 14:40-15:00 |
O-41 |
A Comparison Between One- and Two-Dimension Models for the In-Flight Particle Characteristics in Cold Spraying Process |
R. Huang |
15:00-15:20 (Break)
Chair: H. Waki
| TBC3 |
Paper No. |
Title |
Speaker |
| 15:20-15:45 [Invited] |
I-2 |
Evolution of Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ Coating With a Columnar Structured YSZ Interlayer |
C.J.Li |
| 15:45-16:05 |
O-11 |
Hybrid Plasma Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock |
S.V. Joshi |
| 16:05-16:25 |
O-13 |
Delamination Fatigue Strength Evaluation of Thermal Sprayed Coating by Torsion Pin-Test Method |
K.Kaneko |
| 16:25-16:45 |
O-64 |
Microstructure and Erosion Characterization of WC-Co Type Coatings on Ti6Al4V Alloy Prepared by HVOF Thermal Spray Process From Different Particle Size of Powders |
A. Iwaniak |
| 16:45-16:55 |
|
Closing Remarks |
S. Takahashi |
[Conference Room 102]
Chair: E. Byon
| Testing & Characterization |
Paper No. |
Title |
Speaker |
| 9:00-9:25 [Invited] |
I-6 |
Thermal Spray Coatings : The Importance of Inter-Splat Cracking and Debonding |
G.Sundararajan |
| 9:25-9:45 |
O-47 |
Determination of Thermal Spray Coating Property with Curvature Measurements |
T.Nakamura |
| 9:45-10:05 |
O-48 |
Influence of Process Parameters on The Adhesion of Plasma Sprayed Ferrous Material Coatings on Aluminum Alloy Substrates |
K.Fujimori |
| 10:05-10:25 |
O-49 |
Study on The Mechanical Characteristics of Thermally Sprayed Steel Plates |
T.Fukushima |
| 10:25-10:45 |
O-50 |
Evaluation of Hydrogen Degradation of Steel Plates by In Situ Ultrasonic Testing with 2D Phased Array Matrix Probe |
M. Szwed |
10:45-11:00 (Break)
Chair: T. Nakamura
| Application |
Paper No. |
Title |
Speaker |
| 11:00-11:20 |
O-51 |
Sealing Process and Electric Properties of Thermal Sprayed Alumina Layers for Non-Thermal Dielectric-Barrier-Discharge Plasma Actuator |
S.Kuboya |
| 11:20-11:40 |
O-52 |
Comparable Study of Electric Properties in Plasma Sprayed Ceramic Coatings |
T.Tosaki |
| 11:40-12:00 |
O-53 |
Study on The Application of Aluminum Phosphate Sealant for Thermal Spray Nickel Chromium Coating |
L.T.Quy |
12:00-13:00 (Lunch Break)
Chair: S. Adachi
| Wear1 |
Paper No. |
Title |
Speaker |
| 13:00-13:20 |
O-54 |
Microstructure and Sliding Wear Performance of Plasma Sprayed TiB2-Ni Coatings Deposited from Agglomerate and Sintered Powder |
H.B.Zhu |
| 13:20-13:40 |
O-55 |
Fabrication, Characterization, and Lubricated Wear Behavior of Plasma Sprayed Carbon-Fiber Reinforced Alumina Coatings |
H.Li |
| 13:40-14:00 |
P-13 |
Residual Stresses in WC-Co Surface Coated Systems Studied by High Resolution Neutron Diffraction |
V. Luzin |
| 14:00-14:20 |
O-57 |
Cavitation Erosion Properties of HVOF Sprayed WC Cermet Coatings |
Y.Ohide |
| 14:20-14:40 |
O-58 |
Structural Changes of WC-CoCr Thermally Sprayed Coatings After Dry Sliding Experiments and Real Application |
J.A.Wesmann |
| 14:40-15:00 |
O-59 |
Oxidation and Frictional Properties Of WC-Cr3C2- Ni Cermet Coating |
Y.Ishikawa |
15:00-15:20 (Break)
Chair: M. Suzuki
| Wear2 |
Paper No. |
Title |
Speaker |
| 15:20-15:40 |
O-60 |
Preparation of Al/Al2O3 Composite Coating on Mg Alloy By LT-HVOF Plus MAO |
J.Zhang |
| 15:40-16:00 |
O-61 |
Multimodal Pore Sized Porous YSZ Coating Formation by Flame Spraying of Hollow-Spherical Powder |
H.B.Huo |
| 16:00-16:20 |
O-62 |
Fabrication of Dense Ceramic Coatings by Using HVOF Spraying |
J.H.Kim |
| 16:20-16:40 |
O-63 |
Assessment of The Microstructure of The Self-Fluxed Alloy Sprayed Coatings Re-Melted by High Frequency Induction Heating |
K.Sonoya |
